Oxymax-C is a special adaptation of the Columbus Instruments Oxymax Deluxe System with features specific to compost research. The instrument incorporates specially designed air-flow and temperature controllers that provide a composting environment that is under very precise control.

Maintains normal body temperature. Useful for small animal studies, for example, for acute or chronic surgeries under anesthesia.

Each channel supplies up to 22 watts into a load of 10 ohms. Heat set-point is controlled automatically in Auto mode via thermistor feedback.

It supplies up to 22 watts into a load of 10 ohms. Heat set-point is controlled automatically in Auto mode via thermistor feedback.

The CL-200A Temperature Controller is a dual channel controller capable of accurately maintaining a Peltier device between 0° and +50°C, or a resistive heating element between ambient and +65°C.

The CL-100 Temperature Controller is a single channel controller capable of accurately maintaining a Peltier device between 0° and +50°C, or a resistive heating element between ambient and +65°C.

The current Data Sheet describes the Animal Temperature Controller and warming pad.

The Tri Temp temperature controller was specifically designed for the demanding needs of the laboratory.

The PTC-10 and PTC-20 temperature control systems are designed for heating and cooling purposes in electrophysiological experiments.

The MTC-20/2SD temperature control system is designed for heating purposes in electrophysiological experiments.

The TC-10 and TC-20 temperature control systems are designed for heating purposes in electrophysiological experiments.

This single channel temperature instrument for monitoring water temperature includes an analog output for data acquisition, and with an optional temperature control set you can regulated water temperature in fish tanks, aquaria etc.

The TEMP-4 instrument is used for data acquisition and relay controlling in combination with Loligo software.

This refrigerated/heated circulating bath has a cooling capacity of 240 W and includes a powerful pump and a digital thermostat for accurate control of liquid temperatures in the lab.

The TC-202A Bipolar Temperature Controller operates with five separate micro-incubators to provide temperature control functions for life science research purposes.

The TC-124A and TC-144 Temperature Controllers from Warner Instruments are simple and low cost devices designed for use with our microscope objective warmers.

The AirTherm SMT is a new generation of heat control from WPI designed to be used in Live Cell Imaging applications with microscopes that are fitted with a full microscope environmental chamber enclosure.

The AirTherm SAT is an auxiliary heater designed to be used in Live Cell Imaging applications with microscopes that are fitted with a full microscope environmental chamber enclosure.

When temperature control is required, the SI-TCM2 is used. It can control two cuvettes simultaneously, using digital control to maintain a constant temperature. It has both high and low alarm warnings which can be user defined.