PCTC1001 Temprature Controller maintain the temperature at a desired level in a working chamber. It also can be connected with TS-01 Test Point Sensor to monitor the temperature.

The CH-16 Cubic Heater is designed to warm up a solution and sustain the desired temperature at a constant level via a feedback loop.

The TP-18 Temperature Platform is designed to prevent heat loss from the thermal gradient and maintain a desired solution temperature.

The TS-03 Test Point Sensor is designed to detect the temperature of a desired point of interest. The testing temperature will be displayed on the front panel of the Temperature Controller..

Each channel supplies up to 22 watts into a load of 10 ohms. Heat set-point is controlled automatically in Auto mode via thermistor feedback. A loop-speed selector provides three feedback response times to optimize tp the thermal stability of the device being heated. Heat set-point may also be manually controlled in Manual mode.

It supplies up to 22 watts into a load of 10 ohms. Heat set-point is controlled automatically in Auto mode via thermistor feedback. A loop-speed selector provides three feedback response times to optimize tp the thermal stability of the device being heated. Heat set-point may also be manually controlled in Manual mode.

The TC-202A Bipolar Temperature Controller, the new and improved version of Medical Systems' TC-102 , operates with Harvard micro-incubators to provide temperature control functions for life science research purposes.

The Tri Temp temperature controller was specifically designed for the demanding needs of the laboratory.

The HCT-10 temperature controller is a single-channel heating and cooling controller with an additional external feedback channel.

This single channel temperature instrument for monitoring water temperature includes an analog output for data acquisition, and with an optional temperature control set you can regulated water temperature in fish tanks, aquaria etc.

Small desktop housing, One channel temperature controller, Low noise, Heat only, DIN connector for use with ALA scientific heating devices.

For heating and cooling, One control channel, Bipolar DC output ± 15 V, 5 A max, Control using one of two possible thermometers.

Recent interest in a simple low cost temperature controller to maintain small and medium sized objects at physiological temperatures was the reasoning behind the development of the Physitemp MTC-1 microtemperature controller.

Accurate, versatile homeothermic controller for a range of animals.

The mTCII micro-Temperature Controller is a versatile 2 channel temperature controller powerful enough to heat small tissue baths, microscope stages, small animal heaters etc.

The TCAT-2 family of general purpose PID Auto-tuning Controllers provides accurate temperature control in a variety of laboratory applications.